How To Get Rid Of Rings On Wood Table

Water rings on wood tables can be caused by several factors, including moisture, heat, and pressure. The good news is that there are a few simple ways to remove these unsightly marks without damaging the wood.

Before you start, it is important to determine what type of finish is on your wood table. If you are unsure, you can test it by applying a small amount of water to an inconspicuous area. If the water beads up, the table has a sealed finish. If the water absorbs into the wood, the table has an unsealed finish.

For sealed finishes:

Wipe the water ring with a clean, dry cloth to remove any excess moisture.
Apply a small amount of mayonnaise or petroleum jelly to the area and let it sit for 30 minutes to 1 hour.
Wipe away the mayonnaise or petroleum jelly with a clean cloth.
If the water ring is still visible, you can try using a hair dryer to heat the area. Hold the hair dryer about 6 inches away from the wood surface and move it back and forth until the ring disappears.

For unsealed finishes:

Wipe the water ring with a clean, dry cloth to remove any excess moisture.
Mix equal parts white vinegar and water in a bowl.
Dip a clean cloth into the vinegar solution and wring it out so that it is just damp.
Apply the vinegar solution to the water ring and let it sit for 30 minutes to 1 hour.
Wipe away the vinegar solution with a clean cloth.
If the water ring is still visible, you can try using a commercial wood cleaner or polish.

Tips:

Always test any cleaning solution on an inconspicuous area first to make sure it does not damage the wood.
Be careful not to over-saturate the wood with any cleaning solution.
If the water ring is still visible after trying the above methods, you may need to sand the area and re-finish the table.